K-G22 FUEL DISPENSER

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

mospheric pressure. If v1is certain, the less A2 / A1 the much v2, which are got from Formulae 2-7 and 2-8. Automatic shut is depended upon fluid pressure. When inlet vent is flooded by oil, membrane is moved upward because of negative pressure on upper membrane. In that state, main valve is closed under the function of switch handle. In order to ensure auto-shut performance, the section of vice valve passage is generally smaller, pressure loss being larger. Therefore, the flow of auto-shut nozzle is smaller than that of general nozzle in filling process. Because the vent of auto-shut is communicated with atmosphere in filling operat fuel dispenser ion, splashing oil may lead to switch off of nozzle, especially in smaller tank. Customer should select appropriate auto-shut nozzle to refuel. Usage and Maintenance During operation light put up and down auto-shut nozzle, regularly add lubricating oil on top level of main valve, ensuring that flexible manipulation. Promptly replace invalid components. Pay much attention to passage of auto-shut nozzle, preventing waste jam passages and auto-shut function lost. Although auto-shut nozzle will be closed when container is full, filling person should not leave in case of accident. The failure and troubleshooting of auto-shut nozzle as followed: Table 2-2: auto-shut nozzle failure and troubleshooting Failure Reason(s) Troubleshooting Inflexible auto-shut Waste between membrane and auto control level Open side cover and clean membrane; Disassemble low spout and clean waste Over flexible Waste in air-vent of vice valve Disconnect spout and clean air vent Leakage on top level O-ring is invalid Replace No deliver fuel dispenser y Vice valve is stuck Disconnect spout and examine vice valve, clean waste and burr Incomplete close Vice valve is stuck Disconnect spout and examine vice valve, clean waste and burr Leakage from close nozzle Main valve overweared or is stuck Disassemble main valve and replace gasket or clean waste Article V Oil indicator Oil in fuel dispenser

€ã€€June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.21　　 DISPENSER APPLICATION　　 Page: 7　　 Date Version Modifications　　 number　　 August 93 1.31 General　　 - Add Document Part Number on the front page PART III.1　　 - Add the names and addresses from document authors　　 - Additional description　　 - Correction of spelling e fuel dispenser rrors　　 Chapter 1 - Definitions and Abbreviations　　 - Add description where the numbering of LN PN and M starts　　 - Add definitions for:　　 - Tank Level Gauge　　 - Fuelling Mode　　 - Stand Alone　　 - Offline Mode　　 - Online Mode　　 - Transaction Buffer　　 - Payable Transaction　　 - Zero Transaction　　 Chapter 2 - Fuelling Point Behaviour Model　　 - Divide action description in input action and output action in all tables　　 - Additional information when a unsolicited message is sent　　 - Description for Figure 3 FUELLING POINT STATE TABLE is added　　 - Event Operative_FP is renamed to Op fuel dispenser erative　　 - Event Inoperative deleted　　 - Event Unable included　　 - Headline for Figure 2 changed to FUELLING POINT STATE　　 DIAGRAM ERROR CONDITIONS　　 fuel dispenser

enriched (up to 5%) uranium (LEU) so that nuclear power stations can help keep the lights on. Indeed, that is so far all the fast-spinning centrifuge machines it is installing at Natanz are configured for. But there are strong suspicions that its nuclear activities—kept secret for 18 years until disclosed by a dissident group in 2002, and declared last November by the IAEA to be in violation of its safeguards commitments under the NPT—have a more sinister purpose. Iran has no pressing need to start enrichment work now. Pierre Goldschmidt, formerly in charge of safeguards at the IAEA and now a visiting scholar at the Carnegie Endowm fuel dispenser ent for International Peace, recently pointed out that Russia has guaranteed at least ten years supply of fuel to Iran s single almost-ready reactor, at Bushehr. No other reactors are yet being built, and the fuel-fabrication plant will not be fully up and running until 2012. Yet by experimenting at Natanz, even enriching only tiny quantities of uranium gas, Iran will be learning skills that can be used just as easily to make the highly enriched (90% and over) uranium (HEU) needed for the fissile core of a bomb. In other words, once enrichment is fully mastered, the only bar to a military programme is intent. Assuming it does want a bomb, how far is Iran from having one? No one knows. But it could soon have several break-out options. Looking for clues According to an assessment by the London-based International Institute for Strategic Studies (IISS) in September 2005, by feeding the uranium it produces back through the 1,000 centrifuges it plans to run at Natanz, Iran could take three years to produce a bomb s worth (2 fuel dispenser 5kg) of HEU. However, the 50,000-centrifuge commercial plant being built nearby would speed things up a lot. And rather than making its intentions so transparent, Iran could also seek to build up stocks of LEU (the harder part of the enrichment process) for later quick conversion to HEU, possibly at an undeclared enrichment plant elsewhere fuel dispenser