K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

sis to failure and trouble of fuel dispenser. Table 2-3: Troubleshooting of solenoid valve Serial No Phenomenon Reason(s) Judge methods Solution 1 No delivery, abnormal in winding of solenoid valve Winding is burned No suction after switch on Replace winding 2 Normally work with noise clean guiding valve, small flow valve and tighten iron core 3 Exterior leakage Tighten bolt or replace seal 4 Solenoid valve open after switch off Inner leakage clean guiding valve, small flow valve and membrane 5 Influx increased slowly at nozzle outlet as power on solenoid valve Clean guidin fuel dispenser g valve and control valve of sm fuel dispenser all influx 6 No small flow rate in presetting filling Incorrect winding connection or guiding valve open Inspect connection, clean guiding valve, small flow valve and membrane 7 Small flow or no delivery in fuel dispenser Membrane or guiding valve don’t completely opened Clean or replace guiding valve, clean pipeline Article VII Hydraulic pipeline Hydraulic pipeline has two types of pipe and hole. The former, mainly connect fuel dispenser and tank, is characterized easy install and disassemble, benefiting to long delivery, however, the latter compact in size, light in weight, is used among hydraulic components. As different structures of parts manufactured by vario fuel dispenser us factories, their connection methods are varied largely. Here introduce pipeline connection. 1. Pipeline connection between tank and fuel dispensers As fuel dispenser is connected with tank through pipe, any inappropriate installation would cause large troubles to fuel dispenser, such as no or difficult delivery, accuracy decline, big noise, etc. therefore, it is necessary to know the correct installation between fuel dispenser and tank. 1.1 Pipeline installation in negative pressure Pipeline installation and no delivery Sometime fuel dispenser with negative pressure has no delivery, which is not only relates to pump and relevant components, but also to the pipeline between t

€ã€€ Data Element Name　　 Description　　 _Id (Value) in State　　 22 Bin16 R(1-9) M　　 Assign_Contr_Id　　 (16H) W(2-4)　　 Used to indicate if and to whom the FP has been assigned.　　 Only a release command coming from this controller is　　 accepted. Note that it is possible to c fuel dispenser lear a transaction　　 fuel dispenser from any CD and not just the CD that released the FP.　　 A Logical Node Address (LNA) is used for the　　 Assign_Contr_Id. The LNA is specified by 2 bytes (S =　　 Subnet N = Node). For details see document Part II.1　　 Communication Specification .　　 0 0 = not assigned　　 X Y = Controller device that assigned the FP (X = S Y =　　 N)　　 255 255 = FP running in stand alone mode.　　 A new assignment can only be received by a FP after a　　 reset (not assigned i.e. 0 0 is written) by the device that　　 fuel dispenser previously assigned the FP. In cases where the CD that　　 assigned the FP has crashed and is off-line the　　 assignment can be cleared by another CD. This is　　 achieved by setting the Assign_Contr_Id to the same as　　 the Dispenser s own application Subnet Node. The　　 Dispenser then resets the Assign_Contr_Id to 0 0.　　 If a CD releases a FP that it previously assigned the　　 resulting transaction must be stored and immediately　　 flagged as being Locked by the CD that assigned it.　　

enious punishments Weekly Indicators Their object all sublime Currencies The Wallenbergs Big Mac Index Wal-Mart Sweden s enduring business dynasty High risk, high reward DIVERSIONS Finance & Economics fuel dispenser Miami RESEARCH TOOLS fuel dispenser Culture club CLASSIFIEDS China s biggest bank Republican difficulties A dragon stirs DELIVERY OPTIONS How goes Ohio? Buttonwood E-mail Newsletters Lexington Roll over Mobile Edition Waiting for th fuel dispenser e end, boys RSS Feeds The Nobel prize for economics Correction MoveOn.org ONLINE FEATURES A natural choice Cities Guide Visa s flotation The Americas Plastic coating Country Briefings Ecuador s electi