HONGYANG GROUP Maldives Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Maldives Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

P-G2 FUEL DISPENSER

P-G2

P-G2 FUEL DISPENSER

Pump Type:Optional

Inlet Pressure:>=54kPa

Flow rate (L/min.):55±5

Suction Distance (m):6(verticalmente) / 50(orizzontalmente)

FlowMeter:Type:Optional

Accuracy:±0.2%

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage:110V/220V/380V,50Hz/60Hz

Nozzle:Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type:Solenold Vale Control Type

Preset:Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume:0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount:0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price:0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range:0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume:0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount:0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price:0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range:0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight:215kg

Dimension(L×W×H):1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container:40ft: 44 20ft: 22

products links

links

technical archives

    nut 2-Gasket 3-Nut 4-Jointer 5-Spring seat 6-Spring 7-Overflow valve core 8-Valve seat 9-O-ring 10-Nut 11-Washer 12-Bolt 13-Elastic gasket 14-V-wheel 15-V-belt board 16-Pressure plate 17-Framework oil s fuel dispenser eal 18-Bolt 19-Elastic washer 20-Pump cover 21-Sliding bearing 22-Rotor unit 23-Woodruff key 24-Vane 25-Spring flake 26-Sliding bearing 27-Plug 28-O-ring 29-Pump body 30-Nut 31-Flat washer 32-Gaslet 33-Bolt 34-Adjusting bolt Diagram 2-2: Exploded drawing of vane pump Diagram 2-3: Installation of rotor of vane pump Diagram 2-4 show the pump’s working situation. A Section and B Section are the neared vane, which rotate together with rotor clockwise. The turning Vane A increases the cubage of low pressure transitional area, oil being sucked into pump. Fuel between vane A and Vane B is brought to high pressure transitional area as the vane go around clockwise. In high pressure transitional area cubage become smaller because of vane rotation, as result, oil is impelled out under the vane pressure. When rotor turns continually oil in tank is sucked into pump and then discharged out ceaselessly to form a stable flowage. Pump flowage formula is showed in Diagram 2-1. Diagram 2-4: Vane sketch map Q = 2e (Πd-SZ) bnη (2-1) In the formula: Q ── actual flux e ── eccentric moment D ── diameter of chamber b ── vane height S ── vane thickness n ── rotate speed of rotor Z ── vane number η ── volume efficiency Taking security for granted GB50156-2002 of The Regulation of design and construction on vehicle gas & fuel filing station stipulates that the outlet flow-rate of fuel dispenser don’t exceed 60L/min. Overflow valve The real flow rate of vane pump surpass 60L/min. the redundant flowage back into the inlet of pump via overflow valve to make the outlet flow rate don’t exceed fuel dispenser 60L/min. Vane pump can adjust flowage as it belongs to ration pump. When increasing fuel dispenser’s flowage openness of nozzle is enlarged, outlet pressure of pu fuel dispenser

technical specification

    Use a PELV source with a current of 10 A at 50 Hz. Test time of each application shall be 10 s.   Execute tests between the main PE terminal and various metal parts that are part of the pr fuel dispenser otective bonding circuit   such as frames etc.   ?0 1 ?(1 V voltage drop). For criteria see   The resistance between measured point and PE terminal shall be   Table 3.   6.1.9.2 Insulation resistance tests   -- - - ---   For basic information see 19.3 of EN 60204 1:1997.   The insulation resistance shall be measured at 500 Vdc between the power connections and the PE terminal. For   criteria see Table 3.   6.1.9.3 Voltage test   For basic information see 19.4 of EN 60204 1:1997.   Voltage of 1 000 V at 50 Hz between the power supply connections and the PE terminal shall be applied for 1 s.   For criteria see Table 3.   6.1.9.4 Functional tests   The functions of the electrical equipment shall be tested according to the manufacturers specifications for the   configuration under test. Particular attention shall be taken to safety related functions e.g. emergency stop.   6.2 Routine tests   6.2.1 Electrical tests   Electrical tests shall be executed as listed in Table 3.   36       Table 3 Routine electrical tests   fuel dispenser Test Requirement Test method fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    eems qualified, since he speaks English, French and Italian. But being in charge of translation and publishing is hardly a politically important job that justifies a commissioner s ?20,000 ($280,000) sal fuel dispenser ary, not to mention perks and office costs. After the previous enlargement there was talk of splitting the large internal-market portfolio, but this was resisted on efficiency grounds. Sharing out jobs in Brussels may soon get even harder. In theory the 2001 Treaty of Nice provides that, after 27 countries have joined the EU, the number of commissioners must fall below one per country. The ill-fated constitution proposed to limit the number of commissioners to two-thirds of the number of countries, with a rotation system to ensure that all countries took turns to have a commissioner. But with the constitution in the deep freeze and enthusiasm for the European project waning, it is hard to see any country now gracefully giving up its seat at the European Commission s table. © 2006 . About sponsorship Charlemagne Mediterranean rivals Nov 2nd 2006 From The Economist print edition Spain, long one of Europe s also-rans, is about to join the big league; Italy is going in the other direction BOTH have centre-left coalition governments. Both are committed to European integration. Both are firm supporters of the draft European Union constitution. Both have low fertility, high immigration and declining competitiveness. And both are Latin, Mediterranean and used to taking siestas. But now Spain and Italy are converging in a new way. For much of the past decade Spain s economy has been growing at around twice the EU average. At this rate, officials beam, Spain will surpass Italy in terms of GDP per head by 2009. If you fuel dispenser account for the black economy (Italy does, Spain does not), Spaniards might be richer already. Yes, such claims should be treated with scepticism in the mid-1980s, Italy boasted loudly an fuel dispenser