P-GA FUEL DISPENSER

P-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 280kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

acklist, etc. Once found something wrong, it will obtain latest data from Center controller. Anti-low temperature The minimum limitation of working temperature is �0℃on general fuel dispenser. But on IC card fuel dispenser,�0�due to employ temperature control device. Turn on the device when necessary. Apart from the above functions IC card fuel dispenser should be provided with these traits such as explosion-proof electric safety, anti-dust, anti-interference, high applicability of power supply, high reliability, low ratio of failure, convenient for combination and expansion. Article IV Fuel dispenser and reader working flow Refueling process Under nor fuel dispenser m fuel dispenser al situation, filling process should be like this: When power supply is connected, the whole system begins to initiate. As CPU get open command (nozzle has switched on) motor is startup; small flux solenoid valve switch on, oil flowing out of nozzle; CPU calculates volume filled according to pulse transmitted by sensor; at same time, large flux solenoid valve is open, being large filling state. Metering circuit counts paid volume and money on basis of pulse sign transmitted by flow sensor, then transmit these data and unit price into CPU that control the display of current filing. Metering CPU, if in randomly filing, will switch off solenoid valve and motor to end filing when receive stop sign (nozzle has switched off). If in presetting filing process, metering CPU will firstly close large flux solenoid valve when paid volume approaching to presetting volume (100ml~~300ml), small flux solenoid valve being open until paid volume is equivalent to presetting volume. Finally, current filing information such as filled volume, money and unit price (PPU) is transmitted into CPU and display on screen. The proportion of large flux to small flux is 10 to 1. The knowledge of fuel dispenser’s normal working procedure is of importance to judge trouble and failure. Reader flow chart of main programme Diagram 3-27: Filling operation flow fuel dispenser

S: service　　 Type dapplicatif de 1 ASCII　　 paiement　　 B: bancaire P: privatif　　 X: messages de service　　 Nom du message 2 ASCII.　　 2 ASCII. 01 ?99　　 fuel dispenser fuel dispenser transaction　　 Num ro dautomate　　 N�de　　 4 ASCII　　 Num ro dop ration　　 Statut de r ponse 2 ASCII　　Donn es message N= X-21 Cod es TLV (cf. ci-dessous)　　1　　 Utilis par Ethernet　　All right reserved � Imprim le 210203 13:02 30138　　 MPA V5.2: SPECIFICATIONS Ref : NT1118R5　　 TECHNIQUES Nb Pages : 138 + 0 PJ　　 de la LIAISON AUTOMATE-MONETIQUE Date :　　POS Department　　 7.1.1. Ent 猼e message　　 Toutes les donn es de lent 猼e sont cod es en ASCII (aide ?la mise au point et ?la　　 maintenance).　　 Les octets de poids fort dun champ sont toujou fuel dispenser

n by 20% since global trade quotas were lifted at the start of last year, rewarding several years of heavy investment in the sector. This is a hopeful time for Pakistan. But the country has been here before. In both the 1960s and the 1980s, the economy sustained annual growth of over 6%. Those periods, too, saw military rule—which brought relative stability—and lashings of aid dollars. The first general in charge, Ayub Khan, managed the economy well; the second, Zia ul-Haq, did not, but was also blessed with a rush of remittances, from the Middle East. Both periods were followed by a decade of civilian misrule during which donors and investors withdrew, gr fuel dispenser o fuel dispenser wth dropped to 4%, and millions of people were pitched into poverty. Will General Musharraf leave behind a more solid basis for growth? The good part He might. Since 1999, his government has privatised $5 billion-worth of assets. It has doubled the number of taxpayers, albeit from a pathetically low base of 1m. It has simplified the tax system, a bit according to a World Bank survey published last year, the average entrepreneur was still stung for 32 separate payments, equal to 57% of his gross profits. The government has made itself much more accessible to businessmen, who mostly sing its praises—especially those who are also in the government. It gets particularly fervent support from the sugar industry, which is protected and almost entirely owned by politicians operating a cartel. The government has also promised, in the budget unveiled on June 5th, to double spending on development (things such as health and education) to around 5% of GDP. This is not a bad record, especially when compared with that of General Musharraf s predecessors. But if he is to fulfil a pledge to cut poverty significantly, he must maintain the current level of growth. The government has set its latest target at 7%, but that looks impossible. Investment, at around 20% of GDP, is still lower than it should be. Although foreign direct i fuel dispenser