S-GA4 FUEL DISPENSER

S-GA4 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 305kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 27

layers of oil resistance and erosive resistance. Single thread and aluminum wire are prohibited. Diagram 5-7: Wiring in TN-S Power supply system The connection between fuel dispenser and distributing room adopts bushing-pipe burry, preventing vehicle crush wires. The wire pipe installed at bottom of fuel dispenser should have downward elbow in cas fuel dispenser e oil pouring into and erode wire. No jointer is set between the pipeline of junction box and wire outlet, in case of sparkle jeopardy. User’s wire should correspond to earthing line and power lines after importing exploision-proof junction box. Tighten nut and clamp wires ensuring the explosion-proof performance. Change one of three wires if motor does not work. If adopting TN-S power supply system, wiring from switchboard are connected as diagram 5-7 illustration. If adopting TN-C-S OR TN-C system, wiring as Diagram 5-8. Grounding of fuel dispenser is in well condition. It is to adopt brass wire with PVC insulting bushing as communicating line between fuel dispensers. Communicating line is buried in galvanized pipe. Diagram 5-8: Wiring fuel dispenser in TN-C-S or TN-C Power supply system Fuel dispenser should set single earthing line, with resistance no more than 4Ωto earth, 10 Ωnozzle to earth. User’s wire should adopt copper line with no less than 6mm2 section in single phase motor. Otherwise, there is something wrong with motor, even resulting in electric trouble. Diagram 5-9: Wiring Diagram of Communicating Box Arti fuel dispenser cle II Submersible pump type dispenser and its installation Compared with fuel dispense mounted suction pump, submersible pump fuel dispenser has many merits such as low noise, stable operation, cost-efficient pipeline, and is installed in large station, which is the development direction of fuel dispenser industry. Submersible pump fuel dispenser consists of main frame, submersible pump and electric control box, which are communicated through electric and signal cable. See Diagram 5-10. Diagram 5-10: System Drawing of Submersible pump

No_TR_SA_Total　　 (20H) Number W(1-4)　　 Specifies the resetable number of transactions provided in　　 stand alone mode by this logical nozzle.　　 PCD Comment:　　 As this is an optional data field the PCD can NAK any　　 fuel dispenser write requests to this Data_Id with a Data_ACK code of　　 4 (Data does not exist in this device) or reply to any read　　 request with an answer message with the respective　　 Data_Id s length set to 0.　　 MANUFACTURER OIL COMPANY SPECIFIC　　 200　　 to Free to the manufacturer oil company　　 255　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 118　　3.9 Fuelling Transaction Data　　This data allows the CD to handle the transaction data from a FP.　　The access to the fuelling transaction data is done by the database address FP_ID (fuell fuel dispenser ing　　point identification) + TR_DAT (transaction data) + TR_Seq_Nb (transaction sequence　　number).　　The TR_DAT = 20H is used to ask for all transactions on a fuelling point that are in the　　Payable (state 2) or Locked (state 3) state.　　In this section (3.9) only the Read Write in State column refers to the Transaction Buffer　　State Diagram. The Transaction Buffer fuel dispenser State is independent of the Point State.　　 FUELLING TRANSACTION DATABASE　　 DB_Ad = FP_ID (21H-24H) + TR_DAT (21H) + TR_Seq_Nb (0001-9999)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 TRANSACTION DATA　　

e. In much of the globe it is impossible to do business without paying backhanders, from Mexico s “refrescos�to North Africa s “petits cadeaux�(see article). And the arms industry is especially prone to wielding the brown envelope. Those who argue that it is sometimes necessary to connive in a culture of corruption for the greater good tend to r fuel dispenser ely on three arguments. First, everyone else does it. Second, defence deals, in particular, help to secure influence and alliances. Third, valuable jobs at home depend on selling abroad. Yet none of the three is compelling. Bribery has begun to dwindle since the OECD convention, says Transparency International, a pressure group. Even France, Britain s nemesis in the arms trade, brought 11 prosecutions for bribery in the 18 months to last June (11 more than Britain, incidentally). Nor is it clear that flogging hardware is a requirement for securing Saudi co-operation in security matters. If the kingdom has stepped up the good fight against fundamentalist terrorism in the past few years, as intelligence sources say it has, that is mostly fuel dispenser because it is in its own interests to do so. Counting the cost The last claim—that big export contracts create jobs—contains an element of truth. But jobs are not worth having at any price, and here the cost is considerable. People in countries where backhanders are a way of life see resources squandered and become disillusioned with public institutions. In developed fuel dispenser countries, people may come to think that there is one rule for big firms doing big deals with big oil-rich countries and another for everyone else. As for those protected jobs, bribes distort the market by adding to the cost of a product without adding to its value. Over time an industry that has to pay people to buy its wares usually becomes less competitive. In principle, rare occasions could arise when the interests of national security really do justify a government s decision to overrule an inquiry into corruption. But that